PDA

View Full Version : What?



Turn7
09-14-07, 05:29 PM
We've had a main B bus undervolt.

G.
09-14-07, 05:34 PM
never mind

Gangrel
09-14-07, 05:36 PM
What is this strange language you speak?

extramundane
09-14-07, 06:23 PM
We've,,,had,,a,main,,,B,,,bus,,undervolt,,,,

fix0r3d.

RusH
09-14-07, 06:34 PM
We've had a main B bus undervolt.

Is that the same as the secondary C cab being overamped? :confused:

cameraman
09-14-07, 06:38 PM
We've had a main B bus undervolt.

Boom


Uh Oh

Gnam
09-14-07, 06:39 PM
An “undervolt” meant a substantial reduction of power into Bus B, jeopardizing the equipment running off it.

That was bad, but then main bus A began to lose power...

Hopefully, the new missions to the moon go smoother.

Al Czervik
09-14-07, 07:04 PM
Houston, we have a problem.

rosawendel
09-14-07, 07:45 PM
what did you do?

robot9000
09-14-07, 08:21 PM
Was bound to happen...

Did you toggle the initiator? Thats worked for me before...

ferrarigod
09-14-07, 08:38 PM
who stir'd the tanks? what were the gauges reading?

Methanolandbrats
09-14-07, 09:24 PM
Sounds like the capacitor bearings burned up.

RusH
09-14-07, 09:58 PM
Sounds like the capacitor bearings burned up.

More like bushing in the low voltage power supply causing a spike in the selenium coated drum.

ferrarigod
09-14-07, 10:01 PM
i had a dream last night. it looked like this:
http://www.ohgizmo.com/wp-content/uploads/2006/05/flux_capacitor.jpg

Louie
09-15-07, 10:45 AM
Which bus stops at Wigley Field?

The A, or the B?:confused:

stroker
09-15-07, 11:20 AM
Are you sure it wasn't the flux capacitor?

swift
09-15-07, 11:41 AM
just re-torque the countersink flanges already!

Spicoli
09-15-07, 11:59 AM
Is it a single stage or a multi torsional model?

NismoZ
09-15-07, 12:16 PM
Just call Tom Hanks.

CART License
09-15-07, 12:46 PM
Were going to need a bigger boat

Methanolandbrats
09-15-07, 12:52 PM
Call in a pro.........
http://www2.una.edu/library/lindsey/goober4.jpg

ferrarigod
09-15-07, 01:04 PM
call in a pro? or rock hudson?

Methanolandbrats
09-15-07, 01:09 PM
call in a pro? or rock hudson?
Depends on what needs to be hammered.

Spicoli
09-15-07, 02:16 PM
Depends on what needs to be hammered.


:rofl:

pchall
09-15-07, 04:26 PM
call in a pro? or rock hudson?

That's Goober in the picture, not Gomer.

STD
09-15-07, 04:28 PM
LOL :saywhat: ?

Methanolandbrats
09-15-07, 05:20 PM
That's Goober in the picture, not Gomer. Goober was the ace wrench.

pchall
09-15-07, 08:08 PM
Goober was the ace wrench.

And it was Jim Nabors who was getting hammered by Rock Hudson.

Methanolandbrats
09-15-07, 10:09 PM
And it was Jim Nabors who was getting hammered by Rock Hudson.
Poor Doris :cry:

ferrarigod
09-16-07, 02:35 AM
back home again in rock hudson.

Turn7
09-16-07, 08:40 AM
Houston, we have a problem.

:thumbup: :(

G.
09-16-07, 02:22 PM
:thumbup: :(Is this serious, or can we continue to taunt you?

(I edited my smartass comment, since I wasn't sure...)

Turn7
09-16-07, 09:46 PM
Is this serious, or can we continue to taunt you?

(I edited my smartass comment, since I wasn't sure...)


Always. :p

greenie
09-16-07, 10:49 PM
You know, it's all ball bearings nowadays.

Now you prepare that Fetzer valve with some 3-in-1 oil and some gauze pads. And I'm gonna need 'bout ten quarts of anti-freeze, preferably Prestone. No, no make that Quaker State.

Methanolandbrats
09-16-07, 10:55 PM
You know, it's all ball bearings nowadays.

Now you prepare that Fetzer valve with some 3-in-1 oil and some gauze pads. And I'm gonna need 'bout ten quarts of anti-freeze, preferably Prestone. No, no make that Quaker State. ********..........drown it in Marvel Mystery Oil.

JT265
09-16-07, 11:09 PM
You know, it's all ball bearings nowadays.

Now you prepare that Fetzer valve with some 3-in-1 oil and some gauze pads. And I'm gonna need 'bout ten quarts of anti-freeze, preferably Prestone. No, no make that Quaker State.

It's always aboot the Quaker State with you Bud-swillin' NAscar boys ain't it? :tony:




:rofl:

JT265
09-16-07, 11:10 PM
********..........drown it in Marvel Mystery Oil.

Worked for the clap. ( I didn't say that out loud, did I???) :saywhat:





:rofl:

Methanolandbrats
09-16-07, 11:15 PM
Worked for the clap. ( I didn't say that out loud, did I???) :saywhat:





:rofl:
Jeeebus, I never considered dipping all my tools in that stuff :saywhat:

Al Czervik
09-17-07, 08:37 AM
You know, it's all ball bearings nowadays.

Now you prepare that Fetzer valve with some 3-in-1 oil and some gauze pads. And I'm gonna need 'bout ten quarts of anti-freeze, preferably Prestone. No, no make that Quaker State.

Just bill it to the Underhill's

Turn7
09-17-07, 12:41 PM
Blow up a balloon, let it loose. It makes a whole lot of noise, flies around in a wild uncontrolled manner without directional sense, all the while loosing speed and altitude and ends up as a flop oozing slobber from a limp body.

Lets talk about a five year plan.:cry: